Marine Coating - Enamel (3.785 liters)

☆☆☆☆☆
(1 customer reviews)
N$1,499 (N$396/liter)
SKU: 349875 Category:

In Stock

  • 1 gallon (3.785-liter) container
  • Durable synthetic soya-alkyd topcoat for properly prepared steel
  • High-gloss finish with excellent filling and opacity; flat and matt finishes are also available
  • Coverage: approximately 40–60 m² per U.S. gallon, depending on the surface
  • At 20°C and 65% relative humidity: touch-dry in about 2 hours, recoat in about 8 hours and handle in about 24 hours
  • All colours are available on request

Description

Marine topcoat · Product code 1200

Protective enamel for prepared steel

Admiral Enamel is a synthetic soya-alkyd finishing coat that provides colour, gloss, opacity and a weather-resistant finish over a compatible anti-rust primer.

Coverage

40–60 m²

Per U.S. gallon, depending on the surface.

Touch-dry

About 2 hours

At 20°C and 65% relative humidity.

Recoat

About 8 hours

Handle after approximately 24 hours.

Finish

High gloss

Flat and matt finishes are also available.

Recommended uses

Steel structuresFences, gates and railingsIndustrial machineryDoorsAbove-water boat steelExternal industrial-tank surfaces

Surface preparation

01 · Unpainted steel

Remove loose mill scale and rust with a steel brush or, where possible, by sandblasting. Degrease with thinner or a waterless degreasing agent.

02 · Galvanized surfaces

Apply a suitable wash primer first to obtain a properly prepared surface.

03 · Previously painted metal

Remove loose coating, prime bare areas, apply an undercoat, abrade with sandpaper and finish with enamel.

Application guide

Method Thinning Equipment / notes
Roller As required Rubber-covered roller recommended.
Air spray 20–25% 1.8–2 mm nozzle.
Airless spray 8–12% 0.013-inch nozzle at 12 MPa.
Brush As required Use a soft, long-bristled brush.
Cleaning — Clean equipment with thinner or cleaning solvent before the coating dries.

Technical data

Generic type Soya-alkyd synthetic resin
Solids by volume 37% ± 2%
Solids by weight 66% ± 6%, depending on tint
Specific gravity 1.200 for white
Viscosity 150 seconds, Ford Cup No. 4 at 20°C
Shelf life 48 months in unopened, unstirred packaging

Important limitations

Do not use in direct contact with chemicals, inside fuel or petrol tanks, for permanent immersion, below the waterline or as an internal tank lining unless approved in writing by the manufacturer.

Safety document

Read the safety information before use. Provide suitable ventilation and personal protective equipment.

Download Enamel MSDS (PDF)

The document includes manufacturer-advised primer information. A separate manufacturer-issued primer SDS remains necessary for regulatory or contractual use.

Additional information

Color

Enamel – Yellow green, Enamel 409 – Blue, Enamel 411 – Orange, Enamel 413 – Red, Enamel 416 – Dark green, Enamel 417 – Yellow, Enamel 418 – Gray medium, Enamel black, Enamel white

Volume

3.785 liters

1 review for Marine Coating – Enamel (3.785 liters)

  1. admin –

    Excellent

Add a review

Your email address will not be published. Required fields are marked *

About Us

Documents

Copyright © 2024 GA Marine Survey CC, All Rights Reserved